Aluminum Cerium alloy
Apperance: Sliver grey metallic ingot or slab
Chemical composition: RE*10% or 20%, Al the balance
Application: mainly used as master alloy for additive in aluminum alloying, improve its alloy performance
Additive volume: as the content of is 10% or 20%, there is 100g or 200g RE element in 1 kg master alloy, RE content can be controlled accurately
[*]RE: Rare Earth
Copper Cerium alloy
Apperance: Dark red grey metallic ingot or slab
Chemical composition: RE*10% or 15%, Cu the balance
Application: mainly used as master alloy for additive in copper alloying, improve its alloy performance.
Additive volume: as the content of is 10% or 15%, there is 100g or 150g RE element in 1 kg master alloy, RE content can be controlled accurately, total RE content at 0.04% approx. is properly.
[*]RE: Rare Earth
Other Cu based alloys are also available upon request, like Cu-Zr, Cu-Hf, Cu-Cr, Cu-In, Cu-Ti and etc., composition to be customized and negotiable.
Lanthanum Nickel alloy
|Alloys based on LaNi5 are increasingly used for hydrogen storage applications. Alloys are melted and cast in closely controlled conditions to give the microstructure required for optimum performance; Various methods of improving the high-rate dischargeability of the metal-hydride negative electrode are applied|
Magnesium Cerium alloy
Rare Earth elements will refine the microstructure of the Magnesium alloy, and improve the strength, casting property and machining performance significantly.
Fast heat dissipation, light weight, rigid, good corrosion resistance and dimensional stability, impact resistance, abrasion resistance, good attenuation performance and ease of recycling; high thermal and electrical conductivity, non-magnetic, good shielding characteristics; Widely used in portable devices and automotive industries, to achieve the purpose of weight reduction.
Magnesium Zirconium alloy
|Magnesium Zirconium alloy is mainly used for grain refinement Magnesium alloys, it is helpful to degassing cleaning and other purification for magnesium alloy melting by adding a small amount during alloying. It can also reduce the thermal cracking tendency, improve the mechanical properties and corrosion resistance, reduced susceptibility to stress corrosion for Magnesium alloys.|
Scandium Aluminum alloy
|Scandium Aluminum alloy is a high performance aluminum alloy; with scandium added, not only to significantly refine the cast alloy grains, raise the recrystallization temperature to improve the strength and toughness of Aluminum alloy, but alosy greatly improve weldability, heat resistance, corrosion resistance, thermal stability and resistance to neutron irradiation injury of Aluminum alloy. Therefore, Scandium Aluminum alloy is considered to be a high-performance Aluminum structural material for new generation of aerospace, ships, and etc.|
Vanadium Aluminum alloy
|Vanadium alloy is an important additive in the aviataion and aerospace structural material, which can increase strength, toughness, heat resistance and other performance of aerospace equipment; and also as and additive element for titanium alloy or special alloys.|
|WE43A Mg the balance Al - Mn 0.15% max. Zn 0.20% max. Y 3.7-4.3% RE* 2.4-4.4% Zr 0.3-1.0% Si 0.01% max. Cu 0.03% max.|
|ZE41A Mg the balance Al - Mn 0.15% max. Zn 3.7-4.8% Y - RE* 1.0-1.75% Zr 0.3-1.0% Si 0.01% max. Cu 0.03% max.|